514-654-0882
Camions Nord Sud

Inventory

Straight trucks for sale in Montreal

Box, dump or flatbed: straight trucks for delivery, construction and the trades. Up-to-date inventory with prices in Canadian dollars.

A straight truck carries its load on its own chassis, in a box, a dump body or on a flatbed. Unlike a highway tractor, it does not pull a semi-trailer. It is the truck for deliveries, construction and service work, in the city and in the regions.

Camions Nord Sud sells used straight trucks in Pointe-aux-Trembles, in east-end Montreal. The units below come straight from our inventory, with their known specifications: year, engine, mileage and axle ratings. Each truck is inspected and prepared by our on-site mechanical shop, and several are sold with a valid SAAQ inspection.

Buying guide

Choosing a straight truck

Common uses

The right body depends on the work and on access at your delivery points.

  • Box truck (cube van): deliveries, moving and distribution, with or without a liftgate.
  • Dump truck: soil, gravel, asphalt and snow, in 6, 10 or 12-wheel configurations.
  • Flatbed: building materials, equipment and containers, sometimes with a knuckle-boom crane or winch.
  • Refrigerated truck: food distribution, with a reefer unit whose hours need the same care as a second engine.

Before you buy: GVWR, axles and body

GVWR (gross vehicle weight rating) is the maximum weight of the loaded truck. Your real payload is the GVWR minus the weight of the truck, its body, fuel and driver. Compare each axle rating too: a poorly distributed load can overload the rear axle even under the GVWR.

  • Front and rear axle ratings, and number of axles
  • Inside dimensions of the box or dump body, condition of the floor and doors
  • Liftgate, power take-off (PTO) and hydraulics, if equipped
  • Mileage, service history, engine, transmission and brakes
  • Rust on the frame and crossmembers after several winters

Driver's licence and SAAQ inspection

In Québec, the licence class depends on the truck's net mass and number of axles. A two-axle truck with a net mass under 4,500 kg can be driven with a Class 5 licence. Class 3 covers straight trucks with three or more axles, as well as two-axle trucks with a net mass of 4,500 kg or more. Confirm the exact configuration with the SAAQ.

Heavy vehicles must also meet the SAAQ's mechanical inspection requirements. Each listing in our inventory shows whether the truck is sold with a valid SAAQ inspection.

Financing and trade-ins

Financing is available, subject to approval, through our network of lenders. Pre-approval usually takes 24 to 48 business hours, and the initial review does not affect your credit score. Your current truck can be accepted as a trade-in, and you can also pay cash, by bank transfer or in cryptocurrency.

To compare every category of trucks and trailers, see our guide to truck types.

FAQ

Straight trucks: frequently asked questions

What is the difference between a straight truck and a highway tractor?

A straight truck carries its load on its own chassis: a box, a dump body or a flatbed. A highway tractor pulls a detachable semi-trailer coupled to its fifth wheel. The straight truck is simpler and easier to handle in the city, while the tractor offers more flexibility for long distances and large volumes.

What licence do I need to drive a straight truck in Québec?

It depends on net mass and number of axles. A two-axle truck with a net mass under 4,500 kg can be driven with a Class 5 licence. Class 3 covers straight trucks with three or more axles, as well as two-axle trucks with a net mass of 4,500 kg or more. Confirm the exact configuration with the SAAQ.

How do I choose the right GVWR for a straight truck?

The GVWR must cover the weight of the truck with its body, the driver, the fuel and the heaviest load you carry, with a margin. Check each axle rating as well, since a poorly distributed load can overload one axle even under the GVWR.

Are your straight trucks inspected before sale?

Yes. Each truck is inspected and prepared by our on-site mechanical shop. Several are sold with a valid SAAQ inspection, which is shown on the listing, and the inspection report is available on request.

Can I finance a used straight truck?

Yes, subject to approval. Pre-approval usually takes 24 to 48 business hours through our lender network, and a trade-in is possible. Prices are set in Canadian dollars; the US dollar amount is an indicative conversion.

You don't have the straight truck I need?

Tell us the body, size, GVWR and budget you have in mind. Our vehicle search service can help you find the right truck in Canada and the United States.

Find your next straight truck

Our yard is at 11111 Boulevard Saint-Jean-Baptiste in Pointe-aux-Trembles. Open Monday to Friday from 8 a.m. to 6 p.m. and Saturday from 8 a.m. to noon, no appointment needed.